T-11 FLARED CUPS

Aluminum Oxide 16 grit A16 spec is recommended for ferrous metal grinding. The A16 in an "O" hardness will provide rapid stock removal. The A16 in a "Q" hardness will provide longer life but could cut slower.  

 

Silicon Carbide 16 grit C16 specs are for concrete, stone, and nonferrous metals. For granite/marble grinding we recommend Type 6 cups. Click on T-6 cups in the left margin for granite/marble cups.

 

For foundry grinding of cast and ductile iron we recommend our FA14-Q4B specification. This is combination grain cup specially formulated for iron grinding. There are two cups in this grade listed in the table below. Contact us for other sizes or high usage quotes.

 

The cups listed below have the standard steel back plate.  Contact us for the full metal back style or large order quantites.

T-11 Flared Cups
Code Name Price  
904018 4/3 x 2 x 5/8-11 T-11 flared cup - A16-O4B - 9070 RPM $8.09
904020 4/3 x 2 x 5/8-11 T-11 flared cup - A16-Q4B - 9070 RPM $8.09
905020 4/3 x 2 x 5/8-11 T-11 flared cup - C16-PB - 9070 RPM $8.68
904080 5/4 x 2 x 5/8-11 T-11 flared cup - A16-O4B - 7260 RPM $10.60
905070 5/4 x 2 x 5/8-11 T-11 flared cup - C16-PB - 7260 RPM $11.38
904140 6/4-3/4 x 2 x 5/8-11 T-11 flared cup - A16-O4B - 6050 RPM $11.88
904150 6/4-3/4 x 2 x 5/8-11 T-11 flared cup - A16-Q4B - 6050 RPM $11.88
904143 6/4-3/4 x 2-1/2 x 5/8-11 T-11 flared cup - A16-Q4B - 6050 RPM $12.72
905140 6/4-3/4 x 2 x 5/8-11 T-11 flared cup - C16-PB - 6050 RPM $13.09
904238 6/4-3/4 x 2 x 5/8-11 T-11 flared cup - FA14-Q4B - 6050 RPM $13.76
904235 6/4-3/4 x 2-1/2 x 5/8-11 T-11 flared cup - FA14-Q4B - 6050 RPM $14.61